Over time, wheel studs can become worn, damaged or corroded and may need to be replaced.

The Gktech OEM length wheel studs are ideal for replacing your factory studs and yes, these are a direct OEM replacement.

If you plan on running slip-on wheel spacers then stud length becomes extremely important as the spacer sits between the wheel and hub, this reduces the amount of available thread on the factory studs.

This can result in insufficient thread engagement between the wheel nut and stud which can be super dangerous.

The GKTech extended wheel studs are 0.78" (20mm) longer than the OEM studs, providing the additional length required for slip-on spacers while maintaining proper wheel nut engagement.

Both the OEM length and the extended studs are available in either 12.8mm, 13.0mm or 14.3mm knurl size.
- Available in 12.8mm, 13mm and 14.3mm knurls
- OEM Length option
- Extended +0.78" (+20mm) option
- M12x1.25 thread
- Grade 10.9 studs

Packs of 10 can be seen HERE

Please refer to the fitment guide to determine which studs you need.

NOTE: Our size chart is based on the original OEM hub part numbers and is accurate 99% of the time. However, variations can occur due to factory changes, replacement hubs, or aftermarket hubs being fitted to your vehicle.

To ensure the correct fit, we recommend checking the O.D. of your existing wheel studs and comparing it with our size chart before purchasing.

FITMENT CHART