240sx dual caliper e-brake brackets to suit Wilwood caliper (pair)

GKTECH

240sx dual caliper e-brake brackets to suit Wilwood caliper (pair)

Sale price$149.00 USD
SKU: DUAL-BRKT
In stock
Quantity:

What is a Backorder?

Q: What is backorder?

When a product is on backorder, it means that we have sold out and we are opening a back order due to popular demand. This is essentially a queue, when new stock arrives from production, we’ll send your order.

Q: Will items in my order that are in stock be shipped out first?

We will send your order altogether once your backorder item is ready! You may wish to place separate orders if you want an item before the other is due back in stock.
Pickup available at Albuquerque NM Usually ready in 24 hours

240sx dual caliper e-brake brackets to suit Wilwood caliper (pair)

Albuquerque NM

Pickup available, usually ready in 24 hours

8524 Indian School Rd NE
Albuquerque NM 87112
United States

📦

Free Shipping on orders over $250

Checking Dispatch Times...
* We do aim to achieve this everyday but please note that this is not a gurantee and is subject to daily order volumes.

Order and get upto 745 reward points

Earn points by signing up for our rewards program

Product enquiry

The GKTECH 240sx dual caliper bracket allows the use of a Wilwood 120-10188 caliper in conjunction with an OEM 240sx rotor/caliper combo for use as a standalone hydraulic E-brake.

It is super simple to install with the only modification being to the standard dust cover.

Alternatively, avoid wasting time shopping around for all the individual parts, getting custom brake lines made up, or running generic parts that may or may not work and check out our complete kits:

As seen here at a 10% off combo discount: 240sx Dual caliper hydraulic e-brake setup (10% combo discount)

NOTE: designed to be used with USDM or JDM S-chassis 9mm rear rotors and will NOT work with Skyline/Z32 rotors and will NOT fit with European S-chassis' calipers/rotors

NOTE #2: The Wilwood calipers have a mounting hole of 3/8inch (9.52mm) and the studs used on our brackets are 10mm and as such the 2 mounting holes need to be drilled out on the calipers to 10mm. This is very much a DIY kit and is easy to do.

NOTE#3: The brackets themselves will NOT fit the Gktech rear drop knuckle

FAQs

I've heard dual caliper brackets push your hub out?
Yes, some can as much as 12mm, however, our brackets only push the hub out 6mm.

What modifications are required?
Fitting an extra caliper in this space is not easy but this bracket does make things a lot easier and is an easy install. Simply trim your brake dust cover to suit. No other modifications are required.

Can I use a Wilwood caliper with a Skyline/Z32 rear rotor?
No. Wilwood doesn't make a caliper with the correct thickness to suit a Skyline or Z32 rear rotor and as such, we don't have something to suit. This setup will ONLY work with S-chassis 9mm rear rotors in conjunction with an OEM rear caliper.

Do you sell the calipers to suit this bracket?
We only sell these calipers in our complete kit and do not sell them on their own. The complete kit can be seen here: WILWOOD 240SX DUAL CALIPER HYDRAULIC E-BRAKE SETUP - (10% COMBO DISCOUNT)


Should I run an axle spacer and if so, what size??
By installing this bracket you are spacing the hub out 6mm, this is taken up by the driveshaft.

This causing the bearings inside the driveshaft to run on the edge of the cup, which can lead to premature failures. We suggest adding axle spacers to put the stretched amount back into the driveshaft to ensure it runs further inside the cup and in turn is stronger and more reliable.

We recommend checking which size you need by jacking your car up and dropping it down on ramps, this will load the suspension to its normal operating height. From there, disconnect the diff to driveshaft bolts and with the driveshaft in a relaxed position measure the gap.

Keep in mind the distance of the plate that is supplied with this kit and factor that into the final number, that will tell you what size axle spacer you need. Simple answer for 99% of setups is 5mm if your car isn't super low / 10mm if your car is super low.

VEHICLE COMPATIBILITY

NOTE: Compatible only with standard S-chassis rear rotors in conjunction with a Wilwood 120-10188 caliper (sold separately).

NOTE:#2: Designed to be used with USDM or JDM S-chassis 9mm rear rotors and will NOT work with Skyline/Z32 rotors and will NOT fit with European S-chassis' calipers/rotors

NOTE:#3: The Wilwood calipers have a mounting hole of 3/8inch (9.52mm) and the studs used on our brackets are 10mm and as such the 2 mounting holes needs to be drilled out on the calipers to 10mm. This is very much a DIY kit and is easy to do.

NOTE:#4: The brackets themselves will NOT fit the Gktech rear drop knuckle

Nissan

CEFIRO A31
S13 KA24 240SX
S13 KA24 HATCH
S13 SR20 240SX HATCH
S13 SR20 240SX/SILVIA
S14 240SX/SILVIA
S15 SILVIA
Warning Icon

WARNING: Cancer and Reproductive Harm. http://www.p65warnings.ca.gov

Customer Reviews

Based on 5 reviews
60%
(3)
40%
(2)
0%
(0)
0%
(0)
0%
(0)
N
Nicholas Solomon
Good

Great product just installation was bit weird having to tight the nuts with the disk on the car. Also had to boar out the calipers mounting holes .5mm as was to tight of a fit. I think ur bolts are metric and wildwood holes are board for imperil bolt size.

N
Nicholas Solomon
Good

Great product just installation was bit weird having to tight the nuts with the disk on the car. Also had to boar out the calipers mounting holes .5mm as was to tight of a fit. I think ur bolts are metric and wildwood holes are board for imperil bolt size.

Hi Nicolas, yes, it is a tight fit to get the Wilwood caliper on. You are also correct regarding the metric vs imperial. There should have been a note in the bracket box noting this.

Z
Zaihas Amri Fahdzan Hasfar
High quality build and best customer support ever!!!

no issue with fitment and super easy to installation with the guide from the video? Missing some bush on the order but was resolved very fast - the best support group ever!

H
Henricus Willemse
caliper brackets

Great, they made the fitting easy.

M
Michael Fulton
High-end quality

Super smooth transaction, easy to use website, and fast shipping. The product quality is second to non, gktech products are high-end products!