The V2 GKTECH Z33 350Z/Z34 370z transmission cross member has been designed as a bolt on solution when fitting these transmission to an S chassis when running either an SR20/KA24 motor.
The transmission cross member has been designed to use an OEM S13/S14 transmission mount such as our polyurethane/ solid mount that we also make, seen here;
Solid - https://us.gktech.com/billet-aluminum-solid-transmission-mount
Polyurethane - https://us.gktech.com/v2-polyurethane-transmission-mount
- 0.23' (6mm) steel plate, laser cut and press bent
- CAD designed
- 0.78' (20mm) of adjustment to suit modified setups
- V2 has significantly more stiffness vs our previous V1 model
NOTE: Fitment is based on running an SR20 or KA24. If you're running an engine that sits further back then the cross member most likely won't work.
GKTECH
V2 Z33 350Z/Z34 370z transmission conversion crossmember for 240sx
What is a Backorder?
Q: What is backorder?
When a product is on backorder, it means that we have sold out and we are opening a back order due to popular demand. This is essentially a queue, when new stock arrives from production, we’ll send your order.Q: Will items in my order that are in stock be shipped out first?
We will send your order altogether once your backorder item is ready! You may wish to place separate orders if you want an item before the other is due back in stock.
Order and get reward points
Earn 5% back in reward points
The V2 GKTECH Z33 350Z/Z34 370z transmission cross member has been designed as a bolt on solution when fitting these transmission to an S chassis when running either an SR20/KA24 motor.
The transmission cross member has been designed to use an OEM S13/S14 transmission mount such as our polyurethane/ solid mount that we also make, seen here;
Solid - https://us.gktech.com/billet-aluminum-solid-transmission-mount
Polyurethane - https://us.gktech.com/v2-polyurethane-transmission-mount
- 0.23' (6mm) steel plate, laser cut and press bent
- CAD designed
- 0.78' (20mm) of adjustment to suit modified setups
- V2 has significantly more stiffness vs our previous V1 model
NOTE: Fitment is based on running an SR20 or KA24. If you're running an engine that sits further back then the cross member most likely won't work.
WARNING: Cancer and Reproductive Harm. http://www.p65warnings.ca.gov
FAQs
Will this shifter suit my setup?We can't confirm every possible configuration but we can confirm that if you are using an adapter plate with an SR20 or KA24 in an S13, S14 or S15 with a Z33 or Z34 transmission that our crossmember will fit provided the transmission has been machined down to suit.
If you are using a kit that pushes the setup further back and does not require machining, we cannot gaurantee fitment. Which also means if you're running an engine that sits further back then the cross member most likely won't work.
Do you sell adapter plates or other conversion parts?
At this point in time we are only making shifters and transmission crossmembers.
Do you sell a transmission mount to suit this crossmember?
We do sell a direct OEM replacement transmission mount that does fit, however, you will need to shave one side of the mount slightly, both variants can be seen here;
Solid - https://us.gktech.com/billet-aluminum-solid-transmission-mount
Polyurethane - https://us.gktech.com/v2-polyurethane-transmission-mount
VEHICLE COMPATIBILITY
Nissan
S13 KA24 240SXS13 KA24 HATCH
S13 SR20 240SX HATCH
S13 SR20 240SX/SILVIA
S14 240SX/SILVIA
S15 SILVIA
